XTC 2 CLİP + POWER ADAPTOR

XTC 2 CLİP + POWER ADAPTOR

$195,00 KDV Hariç: $195,00
  • Ürün Kodu: 1310
  • Stok Durumu: Stokta var
  • Miktar:
Ürün Özellikleri - Açıklaması

 

XTC 2 Clip

XTC 2 Clip is a specialized device for servicing HTC phones. It consists of a main device with a flex having a
microsd emulator on its end.  XTC2Clip works same way as JAVA Card method, simple to use to s-off, unlock CID and IMEI repair.

Main Functions

  • Sim unlock or lock a phone to a specified network with your own unlock code
  • Repair IMEI (IMEI 2 for dual sim phones)
  • Repair CID (Country ID used for firmware region lock)
  • Repair MEID (for CDMA area phones)
  • Change security level (S-ON/S-OFF, allows you to run unsigned code, perform service actions, etc)
  • Many other functions you may need time-to-time.

Supported Models
XTC 2 Clip is to support the whole range of HTC phones, however the features may differ from model to model.
Below is the list of tested models as per 1 May 2015:

  • HTC One E9+
    HTC One M9
    HTC One M9+
    HTC One M8s
    HTC Nexus 9
    HTC One (E8)
    HTC One (E8) CDMA
    HTC One (M8 Eye)
    HTC One (M8)
    HTC One (M8) dual sim
    HTC One E8 dual sim
    HTC One mini 2
    HTC One Remix
    HTC One
    HTC One Dual Sim
    HTC One Max
    HTC One mini
    HTC ONE J HTL22
    HTC Desire 320
    HTC Desire 526G+ dual
    HTC Desire 626
    HTC Desire 626G+
    HTC Desire 820s
    HTC Desire 826
    HTC Desire 210 dual sim
    HTC Desire 310
    HTC Desire 310 dual sim
    HTC Desire 510
    HTC Desire 516 dual sim
    HTC Desire 610
    HTC Desire 612
    HTC Desire 616 dual sim
    HTC Desire 620 dual sim
    HTC Desire 620G dual sim
    HTC Desire 816
    HTC Desire 816 dual sim
    HTC Desire 816G dual sim
    HTC Desire 820
    HTC Desire 820 dual sim
    HTC Desire 820q dual sim
    HTC Desire Eye
    HTC Butterfly 2
    HTC Butterfly S
    HTC Desire 200
    HTC Desire 300
    HTC Desire 500
    HTC Desire 501
    HTC Desire 501 dual sim
    HTC Desire 600 dual sim
    HTC Desire 601
    HTC Desire 601 dual sim
    HTC Desire 700
    HTC Desire 700 dual sim
    HTC Desire L
    HTC Desire P
    HTC Desire Q
    HTC Desire U
    HTC Desire 400 dual sim
    HTC Desire C
    HTC Desire SV
    HTC Desire V
    HTC Desire VC
    HTC Desire VT
    HTC Desire X
    HTC Desire XC
    HTC First
    HTC Butterfly
    HTC DROID DNA
    HTC DROID Incredible 4G
    HTC Evo 4G LTE
    HTC One S
    HTC One S C2
    HTC One SC
    HTC One ST
    HTC One SV
    HTC One V
    HTC One VX
    HTC One X
    HTC One X ATT
    HTC One X+
    HTC One XC
    HTC One XL
    HTC Velocity 4G
    HTC SensaXL (X315e)
    HTC Vivid
    HTC ChaCha
    HTC Vivo (Incredible S)
    HTC Saga (Desire S)
    HTC Bliss (Rhyme)
    HTC Icon (Icon_G)
    HTC Legend
    HTC Buzz (Wildfire)
    HTC Vision (Desire Z)
    HTC Ace (Desire HD)
    HTC Pico (Explorer)
    HTC Pyramid (Sensation)
    HTC Rider (Evo 4G)


    How To Setup and Activate Your New XTC 2 Clip
  • IMPORTANT - When you receive your clip, first check that the sim card is inserted gold side up and
    pointed end in first, push it into the clip until it clicks.
  • Then download and run the activator fromHERE
  • Using a MICRO SD Card Reader, connect your XTC 2 Clip to the USB port on your PC.  The drivers are plug and play
  • Once installed run the activator and complete the registration process.
  • Once registered the clip is ready to use

How does it work?
First you need to setup and register your XTC 2 Clip

In order to use its functions – you have to connect it to the SD card port of your phone. The SD port may be
ocated on the left, right or rear (battery) part of your phone. If your phone has no SD port – you must use Y-cable.


Operation mode
There are 2 operation mode for XTC 2 Clip device:

direct – when the phone is in fastboot mode & connected to the PC, using the XTC 2 Clip software
offline – when using a SIM Lock menu of bootloader. To use the offline mode you must first save special
service files on XTC 2 Clip device.

Direct mode

  • To use direct mode:
  • Insert XTC 2 Clip device into phone SD card slot, power on phone into bootloader mode using
    “vol-down + pwr” button. And select “FASTBOOT” option.
  • Connect phone to your PC.
  • Run the XTC 2 Clip software and select “Direct mode”.
  • Choose the desired operation and press corresponding button.
    SIM LOCK FUNCTION IS NOT AVAILABLE IN DIRECT MODE! PLEASE USE OFFLINE MODE FOR
    SIM LOCK MANAGEMENT.
    Important
    IF YOU GET A ‘SD CARD NOT FOUND’ MESSAGE – IT MEANS THAT THE XTC 2 CLIP WAS CONNECTED
    AFTER PHONE WAS POWERED ON. IN THIS CASE PRESS THE ‘REBOOT BOOTLOADER’ BUTTON AND REPEAT THE DESIRED OPERATION.


Offline mode

  • How to prepare service files on XTC 2 Clip device:
  • Connect the XTC 2 Clip device to your PC using any compatible microsd card reader.
  • The device will be detected as a flash/disk drive.
  • Run the XTC 2 Clip software and select “SD editor” tab.
  • If you have previously had your service files on your device, please press “Read from drive” button,
    otherwise you will lose all your existing files once used the “Save to drive”.
  • Select the options you need and press “Save to drive”
  • Insert XTC 2 Clip device into phone SD card slot, power on phone into bootloader mode using
    “vol-down + pwr” button and select “SIMLOCK” option.

    Important
    THE SIM LOCK SETTINGS ARE BOUND TO THE PHONE’S IMEI. IN OTHER WORDS, IF YOU NEED
    TO LOCK/UNLOCK A PHONE, YOU MUST ADD PHONE’S IMEI TO SPECIAL ‘CONFIG.DAT’ FILE USING THE ‘SD EDITOR’ TAB. 

    OTHERWISE YOU WILL GET ‘IMEI CHECKING FAIL’ AND YOUR PHONE WILL NOT BE UNLOCKED/LOCKED!
    CID, IMEI, SECURITY FLAG SETTINGS ARE NOT BOUND, YOU CAN USE IT ON AS MANY PHONES AS YOU
    WISH WITHOUT HAVING TO CONNECT THE DEVICE TO PC EACH TIME.


Offline mode – manual files creation
It may happen that you need to create service files on a PC with no XTC 2 Clip software installed.
In this case you can manually create the files for:

  • IMEI repair – imei.txt
  • Security level change – sf.txt
  • CID change – cid.txt

Please note, that unlike mentioned files, SIM lock configuration ‘config.dat’ is a binary file, and you
may need to use a hex editor to create it. Therefore it’s recommended that you use an XTC 2 Clip
software to create/manage this file.
TO CREATE/MODIFY THE FILES YOU CAN USE SIMPLE ‘NOTEPAD’ SOFTWARE

IMEI file
To repair the phone’s IMEI you need to create a text file called ‘imei.txt’ in the root folder of a
XTC 2 Clipdevice disk drive. Once created, put inside a 14 digits of a IMEI, for example: 12345678901234
SF file
To modify the phone’s security level (S-ON/S-OFF) you need to create a text file called ‘sf.txt’
in the root folder of a XTC 2 Clip device disk drive. Once created, put inside a number that
corresponds to the desire security level:

  • 0 means security OFF (S-OFF)
  • 1 means (S-ON level 1)
  • 2 means (S-ON level 2)
  • 3 means (S-ON level 3, highest)
    CID file
    To repair the phone’s CID you need to create a text file called ‘cid.txt’ in the root folder
    of a XTC 2 Clip device disk drive. Once created, put inside a 8 symbols of a CID, for example: HTC__001

 


M9 and M9+ special instructions
Since the release of M9 HTC has changed the way to service phones. Although some commands are still
available in “fastboot” (now called “download mode”), service functions were moved to special “factory
mode”, which is accessible using VOL UP + POWER ON (NOT VOL DOWN as for fastboot/download mode).

Warning! To be able to run the new factory mode you must have activated clip connected to the phone before
trying to enter factory mode!

The following option is for unlock of M9 and M9+ and for IMEI repair on M9+ only.


 

To unlock M9 or M9+:

  • 1. Copy files to clip using “Copy files for M9” or “Copy files for M9+” (if you haven’t done it before). You
    can have files for both M9 and M9+ at the same time.

    2. Follow the steps from the M9 / M9+ instructions.
  • To repair IMEI on M9+:
  • 1. Save “imei.txt” with the IMEI like usual using SD editor.
    2. Copy files to clip using “Copy files for M9” or “Copy files for M9+” (if you haven’t done it before). You
  • can have files for both M9 and M9+ at the same time.
    3. Follow the steps from the M9 / M9+ instructions.

Package Contents:

  • 1 X Official XTC 2 Clip
  • 1 X Official XTC 2 Protection Card
  • 2 X Spare MicroSD Flex Cable
Optional Extras:
  • HTC Y Cable - Needed to work with phones that dont have microSD card slot i.e.
    HTC One M7 etc. Details Here

     
  • MicroSD Card Reader - Needed to connect XTC 2 Clip to PC and program it with
    settings to unlock phones etc.  Also needed to connect to HTC Y Cable above when
    working on phones that dont have microSD slot. Details Here
 
Taksit Sayısı
Taksit Tutarı
Toplam Tutar
1
195.00
195.00
Anlaşmalı Kredi Kartları
Bankanın Anlaşmalı Olduğu , Kredi Kartları, Maksimum Özellikli, Tüm İşbank Kartları, Ziraat Bankası, ING Bank, Kredi Kartları

Yorum Yap

Adınız:

Yorumunuz:

Not: HTML'ye dönüştürülmez!

Oylama: Kötü İyi

Doğrulama kodunu giriniz:

  • Logo 05
  • Logo 04
  • Logo 03
  • Logo 02

Bu Sitede E-Ticaret Entegrasyonları E-Ticaret Entegrasyonları Kullanılmaktadır.